Regviz

Freescale Semiconductor /MKL28T7_CORE1 /I2S0 /TCR4

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as TCR4

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MKL28T7_CORE1/I2S0/TCR4#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (0)FSD 0 (0)FSP 0 (0)ONDEM 0 (0)FSE 0 (0)MF 0SYWD0FRSZ0 (00)FPACK 0 (0)FCONT

FSE=0, ONDEM=0, FSP=0, FSD=0, MF=0, FCONT=0, FPACK=00

Description

SAI Transmit Configuration 4 Register

Fields

FSD

Frame Sync Direction

0 (0): Frame sync is generated externally in Slave mode.

1 (1): Frame sync is generated internally in Master mode.
FSP

Frame Sync Polarity

0 (0): Frame sync is active high.

1 (1): Frame sync is active low.
ONDEM

On Demand Mode

0 (0): Internal frame sync is generated continuously.

1 (1): Internal frame sync is generated when the FIFO warning flag is clear.
FSE

Frame Sync Early

0 (0): Frame sync asserts with the first bit of the frame.

1 (1): Frame sync asserts one bit before the first bit of the frame.
MF

MSB First

0 (0): LSB is transmitted first.

1 (1): MSB is transmitted first.
SYWD

Sync Width
FRSZ

Frame size
FPACK

FIFO Packing Mode

0 (00): FIFO packing is disabled

2 (10): 8-bit FIFO packing is enabled

3 (11): 16-bit FIFO packing is enabled
FCONT

FIFO Continue on Error

0 (0): On FIFO error, the SAI will continue from the start of the next frame after the FIFO error flag has been cleared.

1 (1): On FIFO error, the SAI will continue from the same word that caused the FIFO error to set after the FIFO warning flag has been cleared.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data